"SKEET SKEET"
WE BURN FOR YOU
BAMBU
A2L
"MONSTER C"
BAMBU
A1
Project:
Printer: Skeet Skeet
Nozzle size: .2 / Set at .xx
Wall Loops:
Sparse Infill Density:
Top Z Layer:
Value X:
Duration: 0hrs 45min
Status:
Notes:
-
-
-
Date: 03JUL2026
IN PROGRESS
Project: Death on a Pike (Mord.)
Printer: Skeet Skeet
Nozzle size: .2
Duration: 0hrs 45min
Status: Mid to Good
Notes:
- Resin based STL
- Lots of after print care required
- Need to set Top Z distance: .20
Date: 03JUL2026
STL
Image
Project: Eagle Statue (Mord.)
Printer: MONSTER C
Nozzle size: .4
Duration: 18hrs 5min
Status: GREAT SUCCESS!!
Notes:
- Lots of supports!
- Lost some detail lower feathers
- Heat gun to flatten feathers
Date: 02JUL2026
STL
Image
Project: Statue (Mord.)
Printer: Skeet Skeet
Nozzle size: .2
Duration: 8hrs 5min
Status: GREAT SUCCESS!
Notes:
- Lost the sword but ok!
-
-
Date: 03JUL2026
STL
Image
Project: Crates & Barrels x2
Printer: Skeet Skeet
Nozzle size: .2
Duration: 11hrs 52min
Status: GREAT SUCCESS!
Notes:
- Took forever
- Moved Skeet to another bench
- No issues w/ vibration
Date: 02JUL2026
STL
Image
IN PROGRESS
Project: Core Streets (Mord.)
Printer: MONSTER C
Nozzle size: .4
Duration: 17hrs 5min
Status: GREAT SUCCESS!!!
Notes:
- Some trouble slicing
- Will print the rest...
- No more posts on this set
Date: 28JUNE2026
STL
Image
IN PROGRESS
Project: Barrels and Sacks
Printer: Skeet Skeet
Nozzle size: .2
Duration: 11hrs 52min
Status: KILL ME!!!
Notes:
- Printing w/ A2L at same time
- Significant bleed over
- Will have to move Skeet Skeet
Date: 27JUNE2026
STL
Image
IN PROGRESS
Project: Stage Area (Mord.)
Printer: Monster C
Nozzle size: .4
Duration: 26hrs 15min
Status: GREAT SUCCESS!
Notes:
- Printing w/ A1 at same time
- Enlarged to 8" across + wall
- Massive print
Date: 27JUNE2026
STL
Image
IN PROGRESS
Project: Lord of Darkness
Printer: Monster C
Nozzle size: .4
Duration: 21hrs 15min
Status: GREAT SUCCESS!!!!
Notes:
- OMG!
- Abstract detail, won't be smooth
- Added Supports & Smoothing
Date: 26JUNE2026
STL
Image
IN PROGRESS
Project: Midnight Serenade
Printer: Skeet Skeet
Nozzle size: .2
Duration: 16hrs 10min
Status: KILL ME!!!!
Notes:
- VLH set at 3/smooth
- Supports weak from beginning
- Skeet Skeet Died...
Date: 17JUNE2026
STL
Image
IN PROGRESS
Project: Midnight Serenade
Printer: Skeet Skeet
Nozzle size: .4
Duration: 8hrs 13min
Status: Mid
Notes:
- Bangs broke off
- Base is not flat like it should be
- Not as smooth as I want
Date: 17JUNE2026
STL
Image
IN PROGRESS
Project: Ruined Cottage
Printer: Skeet Skeet
Nozzle size: .4
Duration: 26hrs 12min
Status: GREAT SUCCESS!
Notes:
- @ 115% of original
- Need to add image of the roof
-
Date: 17JUNE2026
STL
Image
IN PROGRESS
Project: Mordheim Ladders
Printer: Skeet Skeet
Nozzle size: .4
Duration: 2hrs 13min
Status: GREAT SUCCESS!
Notes:
- 2x ladders merged
- Quality, Outer to Inner
-
Date: 16JUNE2026
STL
Image
IN PROGRESS
Project: 1st Mordheim Building
Printer: Skeet Skeet
Nozzle size: .4
Duration: 27hrs 13min
Status: GREAT SUCCESS!!!
Notes:
- Increased size to 115%
- Had to add Supports (+2ish hrs)
-
Date: 14JUNE2026
STL
Image
IN PROGRESS
Project: Fallen Angle Try #3
Printer: Skeet Skeet
Nozzle size: .2
Duration: 38hrs 15min
Status: KILL ME!
Notes:
- First 7x hours were good
- Back support broke off (arrow)
- Will try again w/ a .4mm hotend
Date: 14JUNE2026
STL
Image
IN PROGRESS
Project: City Center Fountain (M)
Printer: Skeet Skeet
Nozzle size: .2
Duration: 26hrs
Status: GREAT SUCCESS!
Notes:
- Removed statue
- Increased quality
- Griffon Quality barely there
Date: 12JUNE2026
STL
Image
IN PROGRESS
Project: Wagon, Broken (M)
Printer: Skeet Skeet
Nozzle size: .2
Duration: 7hrs 14min
Status: Mid
Notes:
- Minor changes to +quality
- At 90%, print failed
- Need heat gun to clean up
Date: 11JUNE2026
STL
Image
IN PROGRESS
Project: Bases, Mordheim (M)
Printer: Skeet Skeet
Nozzle size: .2
Duration: 6hrs 40min
Status: GREAT SUCCESS!
Notes:
- Good quality
- Will reprint a few times
- Will mail sets to the dudes
Date: 10JUNE2026
STL
Image
IN PROGRESS
Project: Fat Dragon Trial #3
Printer: Skeet Skeet
Nozzle size: .2
Duration: 28hrs 49min
Status: GREAT SUCCESS!
Notes:
- My God! HUGE!!!
- Lots of support removal
- Too much support removal!!!
Date: 06JUNE2026
STL
Image
IN PROGRESS
Project: Unicorn, Gift
Printer: Skeet Skeet
Nozzle size: .2
Duration: 9hrs 27min
Status: GREAT SUCCESS!
Notes:
- Minor Smoothing on mouth
- Significant Settings Alteration
- Will make another (evil twin)
Date: 06JUNE2026
STL
Image
Project: Fat Dragon, #2
Printer: Skeet Skeet
Nozzle size: .2
Duration: 8hr 28min
Status: FAIL
Notes:
- Midway structure shift (Line)
- Much Smaller than wanted
- Detail is better nut not much
Date: 05JUNE2026
STL
Image
Project: Servitor Skull, A1 Cap
Printer: Skeet Skeet
Nozzle size: .2
Duration: 10hr 13min
Status: GREAT SUCCESS!!!
Notes:
- Minor Smoothing
- Great print
- Mounting bracket not stable
Date: 03JUNE2026
STL
Image
IN PROGRESS
Project: Gold coin piles
Printer: Skeet Skeet
Nozzle size: .2
Duration: 3hr 13min
Status: KILL ME!
Notes:
- 1st use of .2mm hot-end
- 15 min to declare failure
- Was warned to add supports
Date: 03JUNE2026
STL
Image
IN PROGRESS
Project: Thinking Pot, Gift
Printer: Skeet Skeet
Nozzle size: .4
Duration: 6hr 13min
Status: GREAT SUCCESS!
Notes:
- Alert from app said error, reset
- No issues with print
-
Date: 02JUNE2026
STL
Image
IN PROGRESS
Project: Fading Woman, Art
Printer: Skeet Skeet
Nozzle size: .4
Duration: 10hr 48min
Status: Mid
Notes:
- Will need significant sanding
- Held together... delicate...
- Intention is to paint gold
Date: 31MAY2026
STL
Image
IN PROGRESS
Project: 40K Cup, Pen Holder
Printer: Skeet Skeet
Nozzle size: .4
Duration: 5hr 48min
Status: GREAT SUCCESS!
Notes:
- Ended up being way bigger
- Will use to organize larger tools
-
Date: 30MAY2026
STL
Image
IN PROGRESS
Project: Black Pearl, Gift
Printer: Skeet Skeet
Nozzle size: .4
Duration: 2hr 9min
Status: GREAT SUCCESS!
Notes:
- Good for a .4 Hotend
- Gift was well received
-
Date: 26MAY2026
STL
Image
IN PROGRESS
Project: 90/120mm base
Printer: Skeet Skeet
Nozzle size: .4
Duration: 0hr 24min
Status: GREAT SUCCESS!
Notes:
- Quick and easy
- 90 was to small. Made it 120
-
Date: 25MAY2026
STL
Image
IN PROGRESS
_HEIC.png)
Project: Useless Fat Dragon
Printer: Skeet Skeet
Nozzle size: .4
Duration: 3hr 30min
Status: Mid
Notes:
- I resized the original.
- Supports hard to remove
- Needs significant flashing
Date: 24MAY2026
STL
Image
IN PROGRESS
Project: Key Rack, Gift
Printer: Skeet Skeet
Nozzle size: .4
Duration: 2hr 10min
Status: GREAT SUCCESS!
Notes:
- Didn't take an image sadness.
-
-
Date: 20MAY2026
STL
Image
NO IMAGE
Project: Skull Controller Rack
Printer: Skeet Skeet
Nozzle size: .4
Duration: 2hr 19min
Status: GREAT SUCCESS!
Notes:
- Minor sanding
-
-
Date: 10MAY2026
STL
Image
IN PROGRESS
Project: Angry Pot
Printer: Skeet Skeet
Nozzle size: .4
Duration: 6hr 2min
Status: Mid
Notes:
- Distracting line down the center
- Will apply liquid plastic & sand
- Intention is for texture paint
Date: 03MAY2026
STL
Image
IN PROGRESS
Project: Light Bulb Organizer
Printer: Skeet Skeet
Nozzle size: .4
Duration: 2hr 07min
Status: GREAT SUCCESS!
Notes:
- Filament broken... cleared/fixed
-
-
Date: 26APR2026
STL
Image
Project: I-phone Holder
Printer: Skeet Skeet
Nozzle size: .4
Duration: 0hr 32min +5 for fix
Status: GREAT SUCCESS!
Notes:
- Filament broken... cleared/fixed
-
-
Date: 26APR2026
STL
Image
Project: Plug in Plate
Printer: Skeet Skeet
Nozzle size: .4
Duration: 0hr 30min +10 for fix
Status: GREAT SUCCESS!
Notes:
- Filament broken... cleared/fixed
- Installed perfectly
-
Date: 22APR2026
STL
Image
Project: Upscaled Nuclear Silo
Printer: Skeet Skeet
Nozzle size: .4
Duration: 10hr 47min part I
Status: GREAT SUCCESS!
Notes:
- Used slicer to split and + size
- Took FOREVER!
- It's wonderful!
Date: 11APR2026
STL
Image
IN PROGRESS
Project: Wound Dial - try 2
Printer: Skeet Skeet
Nozzle size: .4
Duration: 2hr 1min
Status: Mid
Notes:
- Better quality than before
- May need to use .2mm hot-end
- Magnets on order
Date: 10APR2026
STL
Image
.jpg)
IN PROGRESS
Project: Wound Dial
Printer: Skeet Skeet
Nozzle size: .4
Duration: 1hr
Status: KILL ME!
Notes:
- 8-10 on dial unreadable
- Dial holder damaged
-
Date: 10APR2026
STL
Image
IN PROGRESS
Project: Huge Modular Plateau
Printer: Skeet Skeet
Nozzle size: .4
Duration: Over a few days...
Status:
Notes:
-
- Longest single print: 11hr 50min
-
Date: 08APR - xxAPR2026
STL
Image
IN PROGRESS
Project: Larger Dice Tray
Printer: Skeet Skeet
Nozzle size: .4
Duration: 6 hrs 37 min
Status: GREAT SUCCESS!
Notes:
- Minor sanding required
- Perfect Rescaling
- 208.876x208.876x37.9775mm
Date: 08APR2026
STL
Image
IN PROGRESS
Project: 20x Command Points
Printer: Skeet Skeet
Nozzle size: .4
Duration: 8 hrs 27 min
Status: GREAT SUCCESS!
Notes:
- Hot-end clogged: "FUBAR"
- Replaced Hot-end (30 min)
-
Date: 07APR2026
STL
Image
IN PROGRESS
Project: Landing Pad
Printer: Skeet Skeet
Nozzle size: .4
Duration: 7 hrs 31 min
Status: GREAT SUCCESS!
Notes:
- Some acceptable lining
-
-
Date: 06APR2026
STL
Image
IN PROGRESS
Project: Sand Bag Formations
Printer: Skeet Skeet
Nozzle size: .4
Duration: 6 hrs 01 min
Status: MID
Notes:
- 30 min of flashing
- Layer lines are visable
-
Date: 05APR2026
STL
Image
IN PROGRESS
Project: Multiple Lg Vents/Fans
Printer: Skeet Skeet
Nozzle size: .4
Duration: 4 hrs 32 min
Status: GREAT SUCCESS!
Notes:
- Clicking noises mid print
- Size was perfect
- Will need to print more...
Date: 05APR2026
STL
Image
IN PROGRESS
Project: 3x Access Ramps
Printer: Skeet Skeet
Nozzle size: .4
Duration: 2 hrs 36 min
Status: GREAT SUCCESS!
Notes:
- Consider gluing a pair together
-
-
Date: 05APR2026
STL
Image
IN PROGRESS
Project: 100mm Base Topper
Printer: Skeet Skeet
Nozzle size: .4
Duration: 0 hrs 59 min
Status: GREAT SUCCESS!
Notes:
-
-
-
Date: 05APR2026
STL
Image
IN PROGRESS
Project: Trench Crusade Cross
Printer: Skeet Skeet
Nozzle size: .4
Duration: 4 hrs 30 min
Status: GREAT SUCCESS!
Notes:
- Support trees left fixable dmg
-
-
Date: 04APR2026
STL
Image
IN PROGRESS
Project: "Last Stand" Platform
Printer: Skeet Skeet
Nozzle size: .4
Duration: 8 hrs 10 min
Status: GREAT SUCCESS!
Notes:
- Error fixed by adding supports
- Will add sandbags later
-
Date: 04APR2026
STL
Image
IN PROGRESS
Project: "Battle Shocked" Tokens
Printer: Skeet Skeet
Nozzle size: .4
Duration: 3 hrs 8 min
Status: GREAT SUCCESS!
Notes:
- Calibrated for higher detail
-
-
Date: 04APR2026
STL
Image
IN PROGRESS
Project: 40k Skull Emblem
Printer: Skeet Skeet
Nozzle size: .4
Duration: 3 hrs 40 min
Status: GREAT SUCCESS!
Notes:
- Reset for higher detail
- Higher detail added 1hr
-
Date: 03APR2026
STL
Image
IN PROGRESS
Project: Black Templar Dice Tray
Printer: Skeet Skeet
Nozzle size: .4
Duration: 3 hrs 3 min
Status: GREAT SUCCESS!!
Notes:
- Trouble with color settings
- Early on stringing during print
- Will do another with a red cross
Date: 03APR2026
STL
Image
Project: 40k Sprue Organizer
Printer: Skeet Skeet
Nozzle size: .4
Duration: 3 hrs 33 min
Status: GREAT SUCCESS!
Notes:
- Works perfectly
- Will probably print another
-
Date: 03APR2026
STL
Image
Project: Mortalis Floor Tiles
Printer: Skeet Skeet
Nozzle size: .4
Duration: 2 hrs 5 min
Status: GREAT SUCCESS!
Notes:
- Printed exactly as STL example
- Some lining (primer will reduce)
-
Date: 02APR2026
STL
Image
Project: Poop Chute V2
Printer: Skeet Skeet
Nozzle size: .4
Duration: 2 hrs 25 min
Status: MID
Notes:
- Object was not centered...
- ...resulting in great detail loss
- Print is useable (needs sanding)
Date: 02APR2026
STL
Image
Printed
Image
Project: Bambu Scraper
Printer: Skeet-Skeet
Nozzle size: .4
Duration: 1 hrs 20 min
Status: GREAT SUCCESS!
Notes:
- No setting tweaks
- Grey only
-
Date: 01APR2026
STL
Image
Printed
Image
Project: Hull 0, Benchy
Printer: Skeet Skeet
Nozzle size: .4
Duration: 0 hrs 14 min
Status: MID
Notes:
- Filament not loaded correctly
- No settings tweaks
- Some stringing
Date: 01APR2026
Printed
Image
